Precision Instruments & Allieds; manufacturer of Precision Induction heater   An ISO certified company URS  
PRECISION HYDRAULIC EQUIPMENT MODEL - PIE / 1001

(Mounting & Dismounting of Power Transmitting Components)


     

System:
The pressure required to dismount bearing assemblies is 200 to 500 kg/cm2 range; and for torque-transmission joints is 800 to 1800 kg/cm2 range. In optional case the pressure required is 2500 to 3000 kg/cm2 is required.

Oil Injector Pump manufactured by PRECISION is designed to operate up to 3000 kg/cm2 giving adequate pressure for all normal dismounting applications.

Field of Use:
This System has a variety of applications; from small components to extremely large ones with cylindrical or taper seats. It is widely used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings.

Mounting and Dismounting:
Oil Injection System is the only method of mounting and dismounting for shrunk fit components without damage. The mounting and dismounting force is reduced, or almost eliminated, by using the oil injection method.






Induction Heater
Induction Heater PIH: 2000 (2.0/2.6 KVA)
Induction Heater PIH: 2002 (6.0 / 8.0 KVA) Induction Heater PIH: 2002SPL(4.6/6.0KVA) Induction heater PIH: 2003 (11 / 16 KVA)
Induction Heater PIH: 2003SPL(10.5/11KVA) Tyre Induction heater PIH: 2005(60/127 KVA)
   
Hydraulic puller
Hydraulic Puller with Separate Hand Pump Hydraulic Puller with Inbuilt Pump & Separator
Hydraulic Puller with Inbuilt Pump Hydraulic Bearing Pullers  
Hydraulic Products
Hydraulic Bearing Equipment Series:PIE 1001 Hydraulic Power Pack Drum Lifter cum Tilter
Hydraulic Bearing Extractor Series : BWT Hydraulic ACDC Stackers Hydraulic Stackers
Hydraulic press Hydraulic Pallet Truck Hydraulic High Pressure Valves
Motorised High Pressure Extractor  Motorised High pressure extractor CTRB Bearing Fitting Tool Kit
 Hydraulic Scissor lift    
Designed by