Precision Instruments & Allieds; manufacturer of Precision Induction heater   An ISO certified company URS  
PRECISION INDUCTION HEATER MODEL PIH: 2001 SPL (3.6 / 4.6 KVA)

PRECISION Induction Heater - Series PIH - is designed to heat the Bearings and other shrink-fit components prior to mounting using latest technology intelligent microcontroller based electronic controls.

The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.

PRECISION Induction Heaters - Series PIH - are available in 5 different models for mounting, range of bearings having bore size from 14 mm and above. Fast, safe and economical heating of bearings is best features of PIH Induction heaters.

PIH series is light weight and portable for better performance. It has power capacity of 3.5 / 4.0 KVA. The controls are intelligent microcontroller based programmable electronic controls. It has two operating modes, Temperature mode and Time mode. Both are controlled through feather touch key Board. Both modes can be seen at the time of operation. It can also be used to heat bearings of larger diameter using a pair of Raiser Blocks size 55 x 55 x 125 mm. The unit can also be used to heat a plate of any magnetic material by placing the plate in place of the horizontal yoke across the vertical supports.

Send Inquiry



Sr. PRODUCT DATA PIH - 2001 SPL
1) Diameter (mm) Bearing 20 to 400
2) Bearing Weight 105 Kg
3) Power 3.6 / 4.6 KVA
4) Voltage 230V / 440V
5) Power Control 25%, 50%, 75%, & 100%
6) Temperature Control (Range) 0 - 250oC
  Maximum Temperature 400oC
  Accuracy Temperature ± 3oC
7) Time - Control 0 - 99 Minutes
8) Residual Magnetism < 2A / cm
9) Overall dimensions (wxdxh) (mm) 690 x 265 x 360
10) Space between supports (wxh) (mm) 160 x 215
11) Weight (Main Unit) 42 Kg.
12) Weight with Standard Yokes 52 Kg.
13) Horizontal Yoke Sizes (mm) 56 X 56 X 300
    28 x 28 x 300
    14 x 14 x 300
14) Can Heat Sealed & Pre-greased Bearings
15) Thermal Over Protection


Sr. Optional Accessories
1) Horizontal Yoke Sizes (mm) 10 x 10 x 300
    20 x 20 x 300
    30 x 30 x 300
    40 x 40 x 300
2) Digital Thermometer (0-500oC)
3) Roll - Sliding Model
4) Swing Arm Model
5) Riser Block (Pair) (mm)
6) Magnetic Temperature Probe
8) Equipment Trolley -------------

 

We reserve the right to change the specifications without prior notice.

Induction Heater
Induction Heater PIH: 2000 (2.0/2.6 KVA)
Induction Heater PIH: 2002 (6.0 / 8.0 KVA) Induction Heater PIH: 2002SPL(4.6/6.0KVA) Induction heater PIH: 2003 (11 / 16 KVA)
Induction Heater PIH: 2003SPL(10.5/11KVA) Tyre Induction heater PIH: 2005(60/127 KVA)
   
Hydraulic puller
Hydraulic Puller with Separate Hand Pump Hydraulic Puller with Inbuilt Pump & Separator
Hydraulic Puller with Inbuilt Pump Hydraulic Bearing Pullers  
Hydraulic Products
Hydraulic Bearing Equipment Series:PIE 1001 Hydraulic Power Pack Drum Lifter cum Tilter
Hydraulic Bearing Extractor Series : BWT Hydraulic ACDC Stackers Hydraulic Stackers
Hydraulic press Hydraulic Pallet Truck Hydraulic High Pressure Valves
Motorised High Pressure Extractor  Motorised High pressure extractor CTRB Bearing Fitting Tool Kit
 Hydraulic Scissor lift    
Designed by